Filter
Top Products
13
LMF-400: EP-80R
Temp Configuration
This section will show you use the LMF-400 Multi-function gauge to
configure your EP-80R Temperature Sensor.
LMF-400 Multi-function Digital gauge.
Boat Setup
If this is the first time you have turned on your LMF-400, you will have
to complete Boat Setup before you will be able to configure your temp
sensor. If you have already completed Boat Setup, skip ahead to the
segment covering EP-80R Temp Configuration.
To execute Boat Setup:
1. The Boat Setup menu will appear, allowing you to select an engine-
tank configuration to match the number of engines and fuel tanks on
your vessel. The Boat Setup menu options are: 1 Eng/1 Tank, 1 Eng/2
Tank, 2 Eng/1 Tank, 2 Eng/2 Tanks, 3 Eng/1 Tank or 3 Eng/3 Tanks.
2. Use the
UP and DOWN keys to select the correct engine-tank
configuration for your vessel and press
ENTER. After setting the
engine/tank configuration, the Tank Size menu will appear with up to
three tank options. (If you selected one tank during Boat Setup, you
will be taken directly to the Setting Tank Size Window in Step 4.)
3. Select the desired tank and press
ENTER, which will open the Setting
Tank Size window.
4. Use the
UP and DOWN keys to input the number of gallons the tank
will hold and press
ENTER. Press EXIT and repeat steps 3 and 4 for each
of the remaining tanks.
5. After all tanks on your vessel have been set up, press
EXIT repeatedly
to return to the main display.