Filter
Top Products
12 Playing a Videotape
• If the tape you want to play is
already in the TV/VCR/DVD, turn
on the power. Press SELECT to
choose TV/VCR mode (the red
VCR/TV light will be on), then
press PLAY
B
.
• When you play an S-VHS format
tape, you cannot get the high
resolution that would be avail-
able on an S-VHS VCR. Noise
lines (black and white streaks)
may appear in the picture.
• If you press SELECT while play-
ing a videotape, play will stop
and the unit will switch to DVD
mode.This will happen also if
you press PLAY
B
(DVD) or
OPEN/CLOSE
A
(DVD) on the
front of the TV/VCR/DVD during
videotape playback.
Helpful Hints
Follow these steps to simply play a videotape. Videotape play-
back options are on pages 34-40.
1
Insert a videotape in the cassette compart-
ment of the TV/VCR/DVD. The power will come
on. If the tape’s record tab is missing, play should start
automatically.
2
If play does not start automatically, press PLAY
B to start play.
3
Press STOP C to stop play.
4
Press j / h to rewind the tape.
5
When the tape finishes rewinding, press
STOP/EJECT on the front of the TV/VCR/DVD
to remove the tape.
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
4
2
3
T0006UG_6006UG_EN_1.qx3 04.5.12 10:09 AM Page 12