Filter
Top Products
64 Audio Language, Stereo Sound
Audio Language
You can select a language for DVDs during play if multiple
languages are available.
● Before you begin, press SELECT to put the
TV/VCR/DVD in DVD mode. The green DVD light will
appear on the front of the TV/VCR/DVD.
1
During DVD play, press AUDIO repeatedly to
choose one of the available languages. The new
audio will be heard. The display will disappear after
about five seconds.
The Audio display may show if the DVD has Dolby
Digital or multi-channel (5.1 CH) sound or show its
sampling rate (48k, for example). The number of
available languages appears after the “ / ” at the right
of the display ( /3, for example).
• If a language is not available after
pressing AUDIO several times, the
DVD does not have that language.
• Some DVDs only let you change
the language in the Disc menu.
• Audio languages may be abbreviat-
ed (such as ENG for English). Or,
three dashes (- - -) may appear
instead of an abbreviation.
•You can adjust Stereo Sound only
when Virtual Surround is OFF.
Details are on page 74.
Stereo Sound
Adjust Stereo Sound to determine whether you will hear the
left channel, the right channel, or both channels (stereo) dur-
ing Audio CD or Video CD playback.
1
Press AUDIO repeatedly during Audio CD or
Video CD play to choose STEREO, L-CH, or R-
CH. The display will disappear in about five seconds.
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
1
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
1
Helpful Hints
1.ENG Dolby D 3/2.1ch 48k/3
STEREO
Only the right channel is heard.
L-CH
R-CH
Only the left channel is heard.
Both right and left channels
are heard (stereo).
T0006UG_6006UG_EN_2.qx3 04.5.12 10:09 AM Page 64