Filter
Top Products
Setting the Clock (cont’d) 23
4
If you already know your PBS channel number,
skip ahead to step 8. If you do not know the
channel number of your PBS station, press ▼ to
select AUTO CLOCK CH SEARCH.Then press
ENTER.
● The TV/DVD/VCR will search for a channel that
carries a time signal. Channels that carry the time
will appear at the top of the screen. Use one of
these channels when you enter your AUTO
CLOCK CH at step 9.
This may take several minutes.An ‘’_ _” appears in
the lower left corner of the screen when the search
is complete.
5
Press SETUP to remove the AUTO CLOCK
CH SEARCH screen.
6
Press SETUP to access the menu again.
7
Press ▲ or ▼ to select SETTING CLOCK.
Then, press ENTER.
8
Press ▼ to select AUTO CLOCK CH,
then press ENTER.
9
Press { or B until the channel number of your
PBS station appears. Use the channel number
you found at step 4.
10
Press SETUP to remove the menu.
11
Press STANDBY-ON to turn off the
TV/VCR/DVD and let the PBS channel update
the clock.
– SETTING CLOCK –
AUTO CLOCK
AUTO CLOCK CH SEARCH
AUTO CLOCK CH
MANUAL CLOCK SET
D.S.T.
B
[ON]
[08]
[OFF]
– SETTING CLOCK –
AUTO CLOCK
AUTO CLOCK CH SEARCH
AUTO CLOCK CH
MANUAL CLOCK SET
D.S.T.
B
[ON]
[02]
[OFF]
• During the Auto Clock Channel
Search, the picture may be dis-
torted.This is normal.
• If there are no PBS stations avail-
able, set AUTO CLOCK to off. Set
the clock manually.
• If the TV/VCR/DVD is connected
to a Cable Box or Satellite
Receiver, select the local PBS sta-
tion on the Cable Box/Satellite
Receiver. Set the TV/VCR/DVD to
the output channel of the Cable
Box/Satellite Receiver (03, 04, or
AUX).
Helpful Hints
– AUTO CLOCK CH SEARCH –
08 10 13
– –
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON
PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
4,7-9
5-6,10
11
T0006UG_6006UG_EN_1.qx3 04.5.12 10:09 AM Page 23