PIC.
PIC.
PIC.
TUN. AUTO PROGRAM
Y
ou can set your TV to receive local TV channels
(from an Antenna) or Cable TV channels (when
you have Cable TV service). Then, use AUTO PRO-
GRAM to set up the channels that are available for
you.This makes it easy for you to select only the
available TV stations when you press CH+ or CH-.
Before you start AUTO PROGRAM, connect the
Antenna or Cable TV signal as detailed on pages five-
six; s
et TV/CABLE as described on page 11.
1
Press MENU to see the menu.
2
Press VOL + or VOL - repeatedly to
highlight TUN. (tuner).
3
Press CH+ or CH- to highlight
AUTO PROGRAM.
4
Press VOL + to start programming TV
channels. Press VOL- if you need to stop
channel programming during the
process.
When channel setup is complete,TUN-
ING FINISHED will appear briefly.Then
the TV will go to its lowest channel.
Auto Program (Setting TV Channels)
Press CH + and CH- to see
which channels are in the
TV’s memory.You can still
select non-memorized chan-
nels using the Number but-
tons on the remote control.
To delete unwanted channels
from the TV’s memory or to
add more channels, see
ADD/ERASE on page 14.
You cannot select TUN. if
the TV is set to VIDEO 1/S-
VIDEO,VIDEO 2, or DVD.
Press TV/AV/EXIT repeatedly
to get to the TV channels.
Helpful Hints
