Filter
Top Products
English
Getting Started 19
Sound
Digital Audio Output
Each DVD disc has a variety of audio output options. Set the
DVD+VCR’s Digital Audio Output according to the type of
audio system you use.
DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if
you have connected the DVD+VCR’s DIGITAL AUDIO
OUT jack to a Dolby Digital decoder (or an amplifier or
other equipment with a Dolby Digital decoder).
Stream/PCM: Select Stream/PCM if you have
connected the DVD+VCR’s DIGITAL AUDIO OUT jack to
an amplifier or other equipment with a DTS decoder, Dolby
Digital decoder or MPEG decoder.
PCM: Select when connected to a 2 channel digital stereo
amplifier. The DVD+VCR outputs sounds in the PCM 2ch
format when you play a DVD video disc recorded with a
Dolby Digital, MPEG1, or MPEG2 recording system.
Sample Frequency
To change the Sample Frequency setting, first select the
desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. With this selection the
DVD+VCR will automatically convert any 96KHz signals to
48KHz so your system can decode them.
If your receiver or amplifier is capable of handling 96KHz sig-
nals, select 96KHz. With this selection the unit will pass each
type of signal through without any further processing.
Others
The DRC, Vocal, PBC and Auto Play settings can be
changed.
" Use v/V to select the desired option and press OK. The
setting of the selected option is changed between On and
Off.
Dynamic Range Control (DRC)
With DVD digital audio technology, you can hear a pro-
gram’s soundtrack in the most accurate and realistic presen-
tation possible. However, you may wish to compress the
dynamic range of the audio output (the difference between
the loudest sounds and the quietest ones). Then, you may
listen to a movie at a lower volume without losing clarity of
sound. Set DRC to On for this effect.
Vocal
Set Vocal to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc will mix into nor-
mal stereo sound.
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played with PBC active or in place.
Off: Video CDs with PBC are played the same way as Audio CDs.
Auto Play
You can set up the DVD Player so a DVD disc automatically
starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, the DVD player will search a
title with the longest playback time and then play back the
title automatically.
On: Auto Play function is active.
Off: Auto Play function is turn off.
Note
The Auto Play function may not work for some DVDs.
5.1 Speaker Setup
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
Disc Audio
DRC On
On
Off
Vocal
PBC
OffAuto Play
5.1 Speaker Setup
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
Others
Disc Audio
DOLBY
DIGITAL
/PCM
Stream/PCM
PCM
Sample Freq.
48 KHz
96KHz