Filter
Top Products
70
How to check, change, or delete a
programmed recording (TIMER)
1
Switch on the TV. If required, select the channel number for the
DVD recorder (channel 3 or 4 or the Audio/Video In channel).
2
With the Recorder on, press TIMER on the remote control.
3
Select 'Timer List' using B or A and confirm with C .
Timer
Timer List
Date
01/22
--/--
Ch.
01
-----
Start
04:25PM
--:--
End
06:05PM
--:--
Rec
Mode
HQ
---
Total record time: 01:40
To change
Press ›
To exit
Press TIMER
4
Select the programmed recording you want to check, change, or
delete with B or A .
Delete programmed recording
1 Press the CLEAR button.
2 Confirm with OK .'Timer Cleared' will briefly appear on the TV
screen.
'--' appears rather than the displayed values
3 To end, press TIMER .
Tip
5
Press C .
Select a field with D or C .
If required, change the information with A , B or the number
buttons 0..9 .
6
In 'Date', you first enter the month and then the date.
7
Confirm with OK .
8
To end, press TIMER .
9
Switch off with STANDBY m .
Programming a recording (TIMER)