Filter
Top Products
40 Timer Recording (cont’d)
9
Press o or p to select a recording tape speed. The
arrow will appear beside your choice.The selected speed will
flash beside REC SPEED. Tape speed details are on page 77.
10
Press C-RESET/CLEAR to store the timer recording.
11
Press TIMER SET. The System will turn off and the red
TIMER REC light will appear on the front of the System. Or,
the System may switch to DVD mode instead. You may use
the DVD Player during a timer recording.You may need to
press VCR/TV on the remote to choose TV position so you
can see the DVD picture at the TV.
If you want to use the VCR until time for the recording, don’t
press TIMER SET until a few minutes before the recording
should start. Or, press TIMER SET only when you know you
won’t be using the VCR anymore (until after the recording).
When the TIMER REC light is on or blinking, you cannot put
the System in VCR mode by pressing VCR or SOURCE.You
must first press TIMER SET to cancel the timer recording
temporarily.Then, you can use the VCR features again.
Cancelling Timer Recordings
1
Press VCR, then press DISC/MENU.
2
Press o or p to select TIMER PROGRAMMING, then
press B.
3
Press o or p to find the program you want to cancel.
4
While the program number is flashing, press s to
clear all the information for that program.
5
Press C-RESET/CLEAR to remove the menu.
05 / 04 TUE
07 : 30 PM
08 : 30 PM
16
SP
PROGRAM NUMBER 1
DATE
START TIME
END TIME
CHANNEL
REC SPEED
ONE TIME PROGRAM
05 / 04 TUE
07 : 30 PM
08 : 30 PM
16
SP
PROGRAM NUMBER 1
DATE
START TIME
END TIME
CHANNEL
REC SPEED
B SP
SLP
ONE TIME PROGRAM
• To change incorrect information,
press
s or B to choose the item
you want to change. Press
o or
p to adjust the information.
• If a timer recording is set and the
TIMER REC light is on, pressing
STOP/EJECT C A will turn on the
System and/or cancel the timer
recording.The TIMER REC light
will turn off. Press STOP/EJECT
C A again to remove the tape.To
use the VCR or watch TV through
the System again, press VCR, then
VCR/TV to put the VCR in VCR
position again.
• If there is no tape in the VCR
when you press TIMER SET, the
TIMER REC light will flash. Insert
a tape.
Helpful Hints
STANDBY-ON
TIMER SET
VCR/TV
SEARCH MODE
REPEAT
TUNER
3
456
789
SLOW
0
+10
2
1
VCRDVD
CLEAR
DISPLAY
SETUP/
PROG
TITLE RETURNMODE/SPEED
C-RESET
AUDIO/
BAND
ANGLE
SUBTITLE
ZOOM
DISC
MENU
OK
PAUSE
REW FF
PLAYSTOP
SKIP/
CH
SKIP/
CH
REPEAT
SOUNDSURROUND
+–
VOLUME
REC
A-B
10
11
9
E9000(P01-54).QX33.latest 03.6.5 2:51 AM Page 40