Filter
Top Products
Multi-Channel Television Sound 47
Your System can play tapes recorded in Hi-Fi (high fidelity) stereo,
which produces a crisp, clear sound from the left and right audio
channels.Your System also can play tapes recorded in a second audio
(usually, that means your program is recorded in a second language).
Of course, your System will play tapes recorded in monaural (single-
source) sound as well.
Your System also will record a video cassette in Hi-Fi stereo or in
second audio, so when you play that tape on the System, it will be in
stereo or second audio.
Read the directions on this page to familiarize yourself with the
stereo and second audio setups. Follow the directions below to
record in stereo or second audio. Follow the directions on page 48
to play tapes recorded in Hi-Fi stereo.
Understanding Displays
When you watch TV channels through the System, portions of the
display shown below will appear when you press DISPLAY twice.
To set the System to receive programs in stereo or second audio,
follow these steps.
1
Press VCR, then press DISC/MENU.
2
Press o or p to select TV STEREO or SAP (Second
Audio Program). Press B so ON appears beside your
selection.
3
Press DISC/MENU to remove the menu.
- M E N U -
[OFF]
[ON]
TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
B
- M E N U -
B
[OFF]
[ON]
TIMER PROGRAMMING
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
• You can only receive and record in
stereo or second audio programs
that are broadcast in stereo or
second audio.You can only play in
stereo or second audio tapes that
were recorded in stereo or second
audio. The display shows you if the
program is in stereo or second
audio.
• If SAP is ON but the program is
not broadcast in Second Audio, you
will hear and record the program
in normal audio.
Helpful Hints
1
3
2
STOP
SLP
12:00 AM
CH 02
STEREO
SAP
If SAP or STEREO appears, the program is available
in second audio or stereo. Even though a program is
available in second audio or stereo, you must program
the System to receive or record the program.
Follow the directions below.
This display is not available during tape play.
STANDBY-ON
TIMER SET
TUNER
VCRDVD
CLEAR
DISPLAY
SETUP/
PROG
TITLE RETURNMODE/SPEED
C-RESET
AUDIO/
BAND
ANGLE
SUBTITLE
ZOOM
DISC
MENU
OK
PAUSE
REW FF
PLAYSTOP
SKIP/
CH
SKIP/
CH
REC
E9000(P01-54).QX33.latest 03.6.5 2:51 AM Page 47