Filter
Top Products
Setting Up the VCR Plus+ Programming System (cont’d) 33
2
Now, compare the channel numbers you have written into the
VCR PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that
some stations have VCR Plus+ and Cable/TV channel numbers
that are the same, and other stations have channel numbers that
do not match. You must tell the VCR the VCR Plus+ and
Cable/TV channel numbers according to the following steps.
3
Press the VCR button, then press the MENU button.
4
Press the PLAY 8 or STOP 9 button to select INITIAL
SET UP, then press the FF :/OK button.
5
Press the PLAY 8 or STOP 9 button to select VCR
PLUS+ CH., then press the FF :/OK button.
6
While a VCR Plus+ channel is flashing, press the PLAY 8
or STOP 9 button repeatedly or press the Number but-
tons so that the arrow appears beside the VCR Plus+
channel number you need.
Press the FF :/OK button.
8
Press the EXIT/STATUS button.
2
Examine the lists
on page 32.
SET VCR PLUS+ CH.
VCR PLUS+ CABLE/TV
99 – – –
01 – – –
02
– – – –
> – – –
03 – – –
04 – – –
SELECT ,9 OR ENTER VCR+
CH. NO. THEN PUSH >/OK
TO END PUSH EXIT
7
While the space for the Cable/TV channel is flashing,
press the PLAY 8 or STOP 9 button repeatedly or press
the Number buttons to enter the Cable/TV channel num-
ber from the list on page 32. Press the FF :/OK button.
Repeat steps 6-7 until you have entered all the channels on your
list.
● If you are using a Cable Box/DBS, the Cable/TV chan-
nel will be 3 or 4 (the Cable Box/DBS output channel)
for every VCR Plus+ channel. You must set the Cable
Box/DBS to the channel you want to record; leave the
Cable Box/DBS on for the timer recording.
4-7
6-7
3
8
3
VCRTV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CHVOL
EXIT/STATUS
TIMER
SMARTPICTURE
SKIP SEARCH INDEX AUDIO/MUTE
MENU
-
+
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS DAILY
PLAY
REW FF
STOP
WEEKLY
/OTR
RECREC
-
+
-
+
SPEED
0
CLEAR
.............
.............
........
........
/OK