Makita CC300D (CC01*1) CRT Television User Manual


 
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
[1] NECESSARY REPAIRING TOOLS
[2] LUBRICATIONS
Fig. 1
Code No. Description Use for
1R027 Bearing setting pipe 18-10.2 assembling Ball bearing 606ZZ, Helical gear 28
Bearing setting pipe 20-12.21R028 assembling Helical gear 47
Bearing setting plate 10.21R035 holding Helical gear 28 when removing Spindle from the Gear
Bearing setting plate 20.21R037 holding Helical gear 47 when removing Helical gear 9B
Ring 221R217 holding Bearing box when removing Spindle from Baring box
Bearing extractor1R269 removing Ball bearing 606ZZ
Round bar for Arbor 4-501R278 removing Ball bearing 604ZZ and Helical gear 9B from Helical gear 47
Round bar for Arbor 8-501R282 removing Helical gear 28 together with Spindle from Bearing box
Bearing plate 10mm1R356 holding Ball bearing 604ZZ when removing Helical gear 47
Bearing retainer wrench1R361
17
3g
1g
a little
Handle (R)
a. Gear room for Helical gear 47
b. Gear room for Helical gear 28 and Helical gear 9B
c. O ring 19 of Gear housing complete
removing / assembling Bearing retainer 14-23
Apply the following lubricant to protect parts and product from unusual abrasion.
b
Helical gear 28
Helical
gear 9B
Helical
gear 47
a
DescriptionItem No. AmountPortion to lubricate Lubricant
Makita grease N No.1
P 2/ 10
Repair
Gear housing
complete
O ring 19
c
17
23
23