Manhattan Computer Products ST 250 Satellite TV System User Manual


 
14
TO RECORD PROGRAMS
To start recording, press REC key. The following record banner will appear. Please note that the picture will appear
paused for a few seconds initially although there will be no pause in the actual recording. During recording you are
actually watching the playback and therefore a pause is noticed before it begins. The recording will remain on until
you press STOP key.
TO WATCH A DIFFERENT CHANNEL WHILST RECORDING ANOTHER
Whilst recording one channel you can watch a different channel, but within the same TP. Press OK key for channel list and
select a channel within the same Transponder. To resume to the channel being recorded, press PLAY key.
TO RECORD TIMED PROGRAMS
Follow steps described in Event Timer. The recording will start automatically at the time when the events come on.
TO PLAYBACK AND EDIT
Press PVR key and select Play / Edit.
Lock: Select Lock and press OK once, the cursor will highlight a recorded event. Select the event and press OK. The lock
icon will appear on the right of the event. After locking press EXIT. The event can only be played back after entering your
password.
STORE: After above settings and exiting, move down to STORE and press OK
PVR REMOTE KEYS
PREV: To cue backwards using a marker. Press repeatedly to move the marker. Then press PLAY again.
NEXT: To cue forwards using a marker. Press repeatedly to move the marker. Then press PLAY again.
Play:
Select Play and press OK once, the cursor will highlight a recorded
event. Select the event and press OK.
Delete:
Select Delete and press OK once, the cursor will highlight a
recorded event. Select the event and press OK. After deleting press EXIT.
Rename:
Select Rename and press OK once, the cursor will highlight a
recorded event. Select the event and p
ress OK a keypad will appear.
Select character and press OK. After naming press EXIT.
Format Hard Disk:
After fitting Hard Disk or to erase previously recorded
events, press OK on this menu. A message Formatting will erase all data
will
come up. To format press OK.
Play / Edit:
When you want to playback or edit the events recorded, press OK
on this menu and follow steps in PLAYBACK AND EDITTING section below.
PVR: To enter PVR play, edit and formatting menus.
PLAY: To commence playback
PAUSE: To momentarily stop.
F.BAC: To fast play backwards. Press repeatedly to increment the speed.
BAC: To slow play backwards. Press repeatedly to increment the speed.
FOR: To slow play forwards. Press repeatedly to increment the speed.
F.FOR: To fast play forwards. Press repeatedly to increment the speed
REC: To start recording.