Filter
Top Products
ELX8 -60 INSTALLATION AND CONNECTION
28 2003. 08. 13 (v 1.0) Rugged CCTV
9.2. Setting Sensor at OSD menu
(1) After a sensor is connect ed, it can be activated through the OSD Configuration menu.
(2) Select the sensor number (S1, S2, etc.) and press the [Enter] button to configure. Use the [ /
] buttons to select “On” or “Off.” Press [EXIT] when finished.
(3) When activated, the “Pre / Post Alarm” function will cause the ELX8-60 to record images at the
specified Speed and Quality for a length of time before and/or after the sensor is triggered.