Filter
Top Products
APPENDIX ELX8 -60
Rugged CCTV 2003. 08. 13 (v 1.0) 53
When installing one primary disk and auxiliary disk
(1) When power is supplied to ELX8 -60, “Disk Manager” runs automatically after rebooting. If not, run it
manually in “MenuàUtilityàDisk Manager”.
(2) There is a HDD that is indicated as “[F] IntA”.
(3) Select a HDD for installing as primary disk. (IntA or IntB)
(3) Press the “Apply ” button after selecting action as “Add”. Then [F] is changed to [*]. If IntB is added
as primary disk, it will be placed at upper list.
(5) Select a HDD for installing as auxiliary disk.
(6) Press the “Apply ” button after selecting action as “Add”. Then [F] is changed to [*].
(7) Select a primary disk, and press the “Apply ” button after selecting action as “Format” and setting the
size of alarm partition. Then [*] is changed to [R].
(8) Select an auxiliary disk, and press the “Apply ” button after selecting action as “Format” and setting
the size of alarm partition. Then [*] is changed to [R].
<Note>
Alarm partition can be set at only primary disk. So it is indicated as “Disable” in case of formatting.
(9) Press the [EXIT] button to shut down “Disk Manager”. (If recording schedule is set, ELX8-60 will
start recording.)