ELX8 -60 INSTALLATION AND CONNECTION
36 2003. 08. 13 (v 1.0) Rugged CCTV
14. Connecting External Storage
14.1. IEEE1394 Port
ELX8-60 has two IEEE1394 ports for external storage device interface. With them, ELX8-60 can expand
storage capacity up to 4TB.
<Note>
Some IEEE1394 Bay may not be recognized by the ELX8 -60. Before purchasing, consult the local
RUGGED CCTV distributor.
14.2. Connecting IEEE1394 Device
When using FireWire supported external HDD, hard drive bays can be connected to 1 port in the front
panel or 1 port in the rear panel. The ELX8 -60 does not supply power to the hard drive bay; therefore
only bays that use external power can be used.
<Note>
ELX8-60 detects external HDD, even though ELX8 -60 runs. If not, it is recommended to connect as
follows.
1. Power off ELX8-60.
2. Connect external HDD to IEEE1394 port.
3. Power on external device.
4. Power on ELX8-60.