Filter
Top Products
ELX8 -60 APPENDIX
58 2003. 08. 13 (v 1.0) Rugged CCTV
is changed to [R].
(8) Select a third HDD of [*] Ext. Press the “Apply ” button after selecting action as “Format”. Then [*] is
changed to [R].
(9) Select a fourth HDD of [*] Ext. Press the “Apply ” button after selecting action as “Format”. Then [*]
is changed to [R].
(10) Press the [EXIT] button to shut down “Disk Manager”.
When using RAID
The following description is when ELX8-60 does’t have internal primary disk and 2 sets of IEEE1394
HDD.
(1) When external HDD RAID is connected to IEEE1394 port, “Disk Manager” runs automatically. If not,
run it manually in “MenuàUtilityàDisk Manager”.
(2) Select a first HDD of [F] Ext. Press the “Apply” button after selecting action as “Add”. Then [F] is
changed to [*].
<Note>
It is when ExtA is added as primary disk.
If connecting the device that is used in ELX8-60, type will be indicated as [V].
(2) Select a second HDD of [F] Ext. Press the “Apply ” button after selecting action as “Add”. Then [F] is
changed to [*].
(4)
Select a first HDD of [*] Ext. Press the “Apply ” button after selecting action as “Format ”. Then [*]
is changed to [R].
(5)
Select a second HDD of [*] Ext . Press the “Apply ” button after selecting action as “Format ”. Then
[*] is changed to [R].