Filter
Top Products
ELX8 -60 INSTALLATION AND CONNECTION
38 2003. 08. 13 (v 1.0) Rugged CCTV
(1) Press [ENTER] button at “Select Disk”.
(2) Select new added HDD (indicated as “[F] ”) using [/] button and press [EXIT] button
(3) Select “Action” using [
/
] button and press [EXIT] button.
(4) Select “Add” using [ / ] button and press [EXIT] button.
(5) Select “Apply ” using [
/
] button and press [EXIT] button. The HDD status is changed to “[*] ”.
(6) Select “Action” using [/] button and press [EXIT] button.
(7) Select “Format ” using [ / ] button and press [EXIT] button.
(8) Select “Apply ” using [/] button and press [EXIT] button. The HDD status is changed to “[R]”
after formatting.
(9) Shut down “Disk Manager” by pressing [EXIT] button.
15. Network Monitoring & Managing
ELX8-60 can be accessed, controlled, and managed from remote site via Internet/Intranet.
15.1. Connecting Ethernet
(1) Turn off ELX8-60’s power switch.
(2) Connect ELX8 -60 to hub with Ethernet cable.
(3) Turn on ELX8-60’s power switch.