Filter
Top Products
WDR-516S Installation Guide
14
Rev 1.0(93/11)
5. Running OSD menu
5.1. Using menu
Press the [MENU] button to open the OSD Configuration Menu.
(1) Main Menu Tabs: The selected tab is shown in blue and the related sub-menus will be shown below
the tab. To move to the previous/next Main Menu Tab, use the [◄ or ►] arrow buttons. To move to a
sub-menu, press the [ENTER] or [▼] buttons.
(2) Sub-menu: The selected sub-menu is shown in blue and the related setting page will be shown to the
right of the sub-menu. Use the [▲/▼] arrow buttons to move within the sub-menu list. To move to the
setting page press the [ENTER] button. To exit the setting page, press the [EXIT] button.
(3) Setting Page: The selected item is shown in gray. To move within each page, use the [◄ or ►] or
[▲/▼] arrow buttons. Press the [ENTER] button to change the value of a setting. When the setting value
is a word, a dialogue box to edit the word will open. When setting value is a number, it should be set with
using the [◄ or ►] or [▲/▼] arrow buttons. After the value is set, press the [EXIT] button. To exit the
Setting Page, press the [EXIT] button.
(4) Help message: Related information for each menu/setting will be displayed here.
(
1
)
Main Menu
(2) Sub-menu
(3) Setting Page
(
4
)
Hel
p
messa
g
e