Filter
Top Products
WDR-516S Installation Guide
28
Rev 1.0(93/11)
9.2. Setting Sensor at OSD menu
After a sensor is connected, it can be activated through the OSD Configuration menu.
Select the sensor number (S1, S2, etc.) and press the [Enter] button to configure. Use the [◄ or ►]
buttons to select “On” or “Off.” Press [EXIT] when finished.
<NOTE>
When activated, the “Pre / Post Alarm” function will cause the WDR-516S to record images at the
specified Speed and Quality for a length of time before and/or after the sensor is triggered.