Filter
Top Products
WDR-516S Installation Guide
36
Rev 1.0(93/11)
14. Connecting External Storage
14.1. IEEE1394 Bay
WDR-516S has three IEEE1394 ports for external storage device interface. With them, WDR-516S can
expand storage capacity up to 4TB.
<Note>
Some IEEE1394 Bay may not be recognized by the WDR-516S. Before purchasing, consult the local
DENTEC distributor.
14.2. Connecting IEEE1394 Device
When using FireWire supported external HDD, hard drive bays can be connected to 1 port in the front
panel or 2 ports in the rear panel. The WDR-516S does not supply power to the hard drive bay; therefore
only bays that use external power can be used.
14.3. Available HDD
It is recommended to use the following HDD models with the WDR-516S. If a non-recommended HDD
is used, DENTEC Corp. will not guarantee the warranty.
Manufacturer : MAXTOR
Series Model No. Size Series Model No. Size
6Y060L0 60GB 4R060L0 60GB
6Y080L(P)0 80GB 4R080L0 80GB
6Y120L(P)0 120GB 4R120L0 120GB
6Y160L(P)0 160GB 4R160L0 160GB
6Y200P0 200GB
DiamondMax
Plus 9
(7200rpm)
6Y250P0 250GB
DiamondMax
16
(5400rpm)
<Note>
Buffer for DiamondMax Plus 9’s model “L” is 2MB; for model “P” the buffer is 8MB.