Filter
Top Products
WDR-516S Installation Guide
31
Rev 1.0(93/11)
11. Connecting External Device with Serial Port
11.1. Connecting Text Input Device (ATM / POS / Access Control)
In addition to images, the WDR-516S can record text data received from POS/ATM through the RS232
serial port.
Connect RS232 to 9pin D-sub of WDR-516S, and configure the “Text” sub-menu under the “System” tab.
Set “Serial Setup” under the “System” menu tab to “RS232” and “Device” to “Text.” The baud rate may d
iffer for each device; consult the device manual for more information.
<Note>
Before installing any external device, consult with the local DENTEC distributor. Some external
devices may not be compatible with the WDR-516S.