Filter
Top Products
24
DVD OPERATION
Slide the POWER switch (on the main unit)
to the ON position to turn the unit on. If the
unit is in Standby mode (the ON/STANDBY
indicator is red), press the POWER
ON/STANDBY button (on the remote) to
turn the unit on.
1
Press the OPEN button to open the disc
tray, “OPEN” will appear on the screen.
Insert a disc with the label side facing up in
the disc tray.
2
PLAYBACK OF A DVD
IMPORTANT NOTES:
• After plugging in, the unit will be in the Power Off mode. Slide the Power switch to the
ON position on the main unit to turn on the unit.
• “INVALID KEY” will appear on the screen during operation if you try to access a function
that is not available on the disc.
• Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, dirty, damaged, or is not present at all, “NO DISC” will
appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc,
position it with the printed title side facing up, align it with the guides and place it in its
proper position.
• It is important that you read the manual that accompanies the DVD disc as there are
features that are on this DVD player that cannot be used with certain DVDs. There are
also extra features that are different for each DVD disc, so they are not explained in this
owner’s manual.
• If the unit is in Stop mode, Pause mode or if there is no disc in the disc tray, the screen
saver will appear on the screen after five minutes.
CONTINUED ON THE NEXT PAGE