Filter
Top Products
- 48 -
To Store Settings
In Feature menu all settings are stored auto-
matically.
Installation Menu
To enter the Installation menu directly, press
the Blue (
) button, or
Press "MENU" button, now you are in main
menu. In the main menu, select Install.
using
or button. Then enter the In-
stall menu pressing
/ or MODE
button.
When any item is selected with or
button in the install menu, the selected item
will be highlighted on the bottom bar.
Changes by pressing
or button will
be result only at highlighted item on the bot-
tom bar.
Selecting Programme
To select programme number, you can use
or button, Digit Buttons or The
Double Digit button with digit buttons.
Selecting Band
Band, can be chosen either,
C or S by
or button.
Selecting Channel
Channel can be changed by or but-
ton, by Digit Buttons or by the Double Digit
button with digit buttons.
For band C,
01 - 83,
For band S,
01 - 41.
Selecting Search
To start the search process, press
but-
ton for forward search or
button for back-
ward search. If a signal is found or reaches
to end of the band after searching, press
or buttons to continue search pro-
cess. To stop the search process when you
want, press
or buttons again.
Selecting Fine Tuning
You can use the Fine Tuning process for
fine adjustment (after coarse adjustment), if
you are not happy about the image on the
screen.
Use
or button on Fine Tuning item,
until getting the best image on the screen.
Normally the Fine Tuning cursor is placed
next to the left side on the slider and this is
indicated with one arrow.