- 54 -
PC SOUND MODE:
This item selects the sound source for PC
mode. But when the PIP is displayed and
highlighted in green border, sound switches
to whatever is displayed in the PIP. When-
ever you close the PIP or make the PIP bor-
der blue again by disselecting the PIP,
sound switches back to PC Sound Mode.
Geometry Menu:
In the Main menu, select Geometry using
or button, then enter the Geometry
menu pressing
, or MODE buttons.
Adjust the required horizontal or vertical po-
sition or Hsync Phase by
, buttons.
You can make position adjustment directly
by Auto position.
Select Auto position by
or buttons
and press
or button.
Wait is displayed at the bottom of the
menu. After a few seconds screen geometry
is adjusted automatically.
Warning: Auto position adjustment recom-
mended to be done with the full screen im-
age for the proper adjustment.
To store this menu setting select Store by
or buttons and then press MODE
button, Stored will be displayed for few
seconds at the bottom of menu.
Source Menu:
In the Main menu, select Source using
or
button, then enter the Source menu
pressing
, or MODE buttons.
Select the available sources of TV, Av-1,
Av-2, Av-3, S-Video or PC by pressing
,
or MODE buttons.
PIP Source Menu:
This menu is available when the PIP dis-
played.
In the Main menu, select PIP Source using
or button, then select the any avail-
able source of TV, AV-1, AV-2, AV-3 or S-
Video pressing
, then MODE but-
tons.
Teletext
Teletext is an information system that dis-
plays text on your TV screen. Using the Tele-
text information system you can view a page
of information on a subject that is available
in the list of contents (index).
On screen display is not available in text
mode.
Contrast, brightness or colour control is not
available, but volume control is available in
text mode.
To operate Teletext
Select a TV station on which Teletext is being
transmitted.
Press (TELETEXT) TEXT button. Usually
the list of contents (index) is displayed on
the screen.