Filter
Top Products
- 49 -
Setting VCR ( Video Cassette Recorder )
Mode
This item can be seen in TV, AV-1, AV-2, AV-3,
S-VIDEO modes.
If you want to watch a VCR source from one
of these modes, then it will be better to set
VCR mode on. For this, while the cursor is
on this item press the
or buttons to
set it On.
If you want to watch a DVD , then you must
set this item off; because DVD is not a
source like a VCR and to see the picture
better, you must set the VCR mode Off.
To Store Settings
Press MODE button on the remote control
to store the settings directly.
or,
Press
, or MODE button on Store
option to store Install menu settings.
Programme Menu
To enter Programme menu directly, press
the
button in TV mode, or
Press "MENU" button, now you are in main
menu. In the main menu, select Program.
using
or button. Then enter the
Programme menu, press
/ or
MODE button.
Moving cursor to four direction you can reach
20 programmes in the same page. By
scrolling the pages up or down by pressing
the navigation buttons you can select all the
programmes in TV mode (except the AV
mode).
By cursor action, programme selection is
done automatically. In order to select
programme is also possible by using digit
or double-digit button. In this way program-
me selection gets also automatically. The
TV Status is changed by the programme se-
lection too. When using double-digit button
in order to select a programme, the
Programme Number in TV Status OSD is
displayed in "P --" form, and by pressing
digit buttons they are displayed in it.
Programme Number is between 00 and 99.
Programme Name has a name string with 4
characters. After autostore process the Pro-
gramme Names are set to:
Channel search "C-01" or "S-01" (band
and channel number) or name of the tuned
channel if defined.
At the bottom of the menu there is a pro-
gramme sort functions section. Each func-
tion is activated by color button (seen
above). Name allows changing the pro-
gramme name. By Delete you can delete
programmes that you decided. Insert sec-
tion is for inserting programmes into an-
other programme spaces. By selecting
Autostore section, Autostore menu will be
available.
Name:
To change the name of a decided program-
me, that programme is selected and
pressed to the Red (
) button (Name).
The first letter begins to blink on the se-
lected name. To change that letter or
button can be used, and to select the
other letters,
or button can be used.
If the cursor is at the last letter of the