31
The function "Picture position" is available
only on TV sets with a 16:9 screen.
Calling the picture-position function
3)
:
• Press and hold the function key "F1" for
at least one second. The window
"Special functions" appears on the
screen.
• Press numeric key
ብ
to open the
function "Picture position".
.
• Use the
-
+
key to move the picture down
or up to the desired position (e.g. so that
the station logo or subtitles are visible).
This setting is not stored. However,
you can save the picture position
globally by following the instructions in
Section 11.1.
☞
☞
18. Special functions
Picture position
Call the menu
F1
The following description applies only to TV sets
with a 4:3 screen.
Calling the zoom function:
• Briefly press function key „F1“
The small window "Zoom" is displayed
at the bottom left corner of the screen.
• The zoom factor can now be adjusted
with the
-
+
key.
The new zoom factor is stored until it is
changed again and can be recalled at
any time with the „F1“ key.
18. Special functions
Zoom
Call the menu
F1
- Zoom +
Special-
functions 1
Picture format
Picture pos., vertical
ᕣ
ᕤ
3) This menu item is available
only on TV sets with a 16:9
screen.
604 47 2017.A1 23.09.2004 14:45 Uhr Seite 31