Metz MF 72TL68, MF 82TL95 CRT Television User Manual


 
55
Tone settings
You can switch the tone settings between
„Normal“ and „Speech“.
Noise reduction
This setting can be used to improve the quality of
pictures with „snow“ or other noise resulting from
poor reception conditions. Depending on the
amount of interference, various correction facilities
are available and the noise reduction can be set
individually for each programme position.
Standard settings
Standard settings are all values (such as bright-
ness, volume, chrominance, etc.) which are the
same for all programme positions.
Panorama
2)
The panorama function permits "normal" pro-
grammes in 4:3 format to be adapted to the 16:9
format of the CRT. This is done by expanding the
width of the picture to fill the entire width of the
screen.
Noise reduction
This setting can be used to improve the quality of
pictures with „snow“ or other noise resulting from
poor reception conditions. Depending on the
amount of interference, various correction facilities
are available and the noise reduction can be set
individually for each programme position.
Rotation
2)
This function can be used to compensate for the
Earth’s magnetic field. It may be needed when the
TV set is first installed, or if the TV set is moved to
a different location, and the picture is not aligned
horizontally on the screen.
VCR
The VCR function ensures optimum picture quality
when playing back recordings from tape devices
32. Glossary
2) Available only on TV sets
which are equipped with this
option.
604 47 2017.A1 23.09.2004 14:45 Uhr Seite 55