Filter
Top Products
44
24. AV devices
Call the menu
MENU
OK
OK
AV (Audio/Video) devices are devices which
provide picture and/or sound signals for play-
back on your TV set (for example, video cas-
sette recorders, DVD players, etc.).
In the menu „AV devices“, the setting window
displays a list of all common AV units.
Always connect AV devices exactly as
shown in the connection diagram in the TV
menu of your TV set!
SVHS/Hi8 and Data Logic video recorders must
always be connected as „Video recorder 1“. A
„normal“ VHS video recorder may be
connected as „Video recorder 1“ or
„Video recorder 2“.
Connecting A
V devices
• Press the „MENU“ key to open the TV
menu.
• Press the yellow key to open the
menu „AV devices“. In the factory, a
video recorder is programmed for the
EURO 1 socket and a DVD player for
the EURO 2 socket. If you want to
change these settings, you can select
one of the AV devices with the cursor
control key and delete it by pressing
the ll key.
• Use the cursor control key to select the device
you wish to connect to the TV set.
• Press the „OK“ key to confirm your selection
and, in the setting window, set the parameters
„Signal OUT“ and „Signal IN“ to match the AV
device (see the operating instructions for the AV
device for details).
• Press the „OK“ key. The newly connected device
appears in the connection diagram.
Caution: connecting a new device may
cause an existing connection to be modi-
fied. If this happens, you will have to move
the cables for the affected AV device to the
correct positions.
☞
☞
i
Select a new device:
Videorecorder 1 Decoder A
DVD/Videorec.2 Decoder B Other device
DVD / CD Satellite / SetTop
Select device with
cursor and call
device attributes
with OK
Picture-Volume
AV devices
Station table
Timer
Configuration
TV-Menü
AV devices
Connect as follows:
DVD/Videorec.1
FBAS
EURO1
EURO2
Front of TV set
2)
DVD / CD
FBAS
Camcorder/Photo
I I I I I I I I I I
I I I I I I I I I I
I I I I I I I I I I
I I I I I I I I I I
Back of TV set
604 47 2017.A1 23.09.2004 14:45 Uhr Seite 44