Filter
Top Products
5
1.1 Turning the TV on and off
Press this key on the remote
control....
The screen displays Explanation
1. Call the Equipm.
Configuration menu
OK
P
+
+
-
AV
--/-
-
P
123
456
789
0
A
B
TV
?
MENU
Equipm. configuration
698-06N-GB
red
green
blue
yellow
white
REC
Ȅ
Function keys
Device connection
SAT settings
Language:
further
English
store?
OK
?
MENU
return Help
TV
TV picture
2. Language selection in the TV menu
The desired language for the entire TV menu is adju-
sted in the „Equipm.Configuration“ menu.
Select the desired language with the keys when
the submenu for the language is displayed on a green
background.
Press the key to confirm and store the selection
made. The complete text in the TV menu is then dis-
played in the selected language.
OK
+
-
MENU
OK
4. Return to TV picture
TV
2. Adjust the language
3. Store the selected langua
ge
TV picture
+
-
red
green
Turning on with the ON/OFF key
Before turning on a cold TV in a warm room, first
allow any condensation mist that may have formed
on the screen to evaporate.
Press the ON/OFF key.
Programme position 1 is then selected. Depending on the assign
-
ments made, the following information will appear in the screen
box:
Turning off with the ON/OFF key
Press the ON/OFF key. The television is now disconnected from
the mains.
You are advised to turn off the TV with the ON/OFF key after station
closedown and when it is not going to be used for an extended
period of time.
Turning on with the remote control
The programmes can be directly selected with the 0-9 keys
when the television is in standby mode.
Select single-digit programme numbers by pressing the corre-
sponding numeric key.
Two-digit programme numbers are entered with the presel-
ect key:
• The television is switched to the last watched programme.
• The preselect box is displayed on the screen.
• The 2-digit programme number can now be entered with the
numeric keys.
The last programme watched before the television was switched
off can be set with the key.
The television is automatically set to standby mode ten minutes
after station closedown. However, this is not the case if the station
starts to transmit a test card within these ten minutes.
Turning off with the remote control
Press the key to switch the TV to standby mode.
The standby status is indicated by the red lamp.
-/--
ARD
Pr 1 MONO
Pr - -
ARD
PS 1 MONO
18:15:33
18:15:33
Terrestrial
programme position
SAT programme position
(only with built-in
SAT upgrade module)