2 - 1
MELSEC-A
2 SYSTEM CONFIGURATION
2
2 SYSTEM CONFIGURATION
This chapter describes the system configuration for use of the AJ65SBT-64AD.
2.1 Overall Configuration
The overall configuration for use of the AJ65SBT-64AD is shown below.
CC-Link master/local module (local station)
(AJ61BT11, A1SJ61BT11, AJ61QBT11, A1SJ61QBT11, QJ61BT11)
CC-Link dedicated cable
(Intelligent device station) (Remote I/O station)
(Remote device station)
AJ65SBT-64AD
(Remote device station)
1 station occupied
RX/RY: 32 points each
RWr/RWw: 4 points each
Object whose
voltage/current
will be detected
Terminal resistor
Terminal resistor
CC-Link master/local module (master station)
(AJ61BT11, A1SJ61BT11, AJ61QBT11,
A1SJ61QBT11, QJ61BT11)