Filter
Top Products
5 - 1
MELSEC-A
5 PROGRAMMING
5
5 PROGRAMMING
The programming procedure, basic read/write programs, and program examples for
the AJ65SBT-64AD are described.
Refer to Section 3.6 for the remote registers and to the AnSHCPU/AnACPU/AnUCPU/
QCPU-A (A Mode) programming manual (dedicated instructions) for details of the
dedicated instructions.
5.1 Programming Procedure
Create a program which executes the AJ65SBT-64AD analog/digital conversion by
following the procedure below:
START
Perform moving average processing?
END
No
Yes
A/D conversion enable/prohibit specification
Input range setting
Moving average processing count setting
Specify the channel for which moving average
processing will be performed.
Read digital output value read