Filter
Top Products
18
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Searching the desired picture
Basic search
This function is used to search the start point of needed
picture. This unit is equipped with 5 search functions
(Search by Time and Date, Search by Alarm List, Find
data storage location, Search by Book Mark, and Search
by Motion). In this section, the common search methods,
search by time and date and search by alarm list, are
described.
Search by Time and Date
This item is used to search recording picture by specifying
date, hour, minute, second, and camera number. The
search result is displayed in still frame playback. When
searching for 1 camera number, the search result is
displayed in the single screen display. When searching
for 2 or more camera numbers, it is displayed in SPLIT16
screen.
Search by Time and Date
2
User Menu
Search
1
step1. To input the time and date to be searched manually,
select “Manual” and then set the month, date, year,
hour, minute, and second.
• To input the start and end points of recording,
select “Start” and “End” respectively.
step2. Set the camera numbers to be searched.
step3. Select “Search.”
step4. To playback the searched picture, press either the
PLAY button or the PAUSE button.
step5. To stop playback or still frame playback, press the
STOP button.
• To change the source device to be searched, set the
desired device in the <Select Source Device> (User
Menu Search Select Source Device).
• To display the single screen display of the desired
camera number when the search result is displayed
in the SPLIT16 screen, press the desired camera
number button.
• When there is no recording of the set time, the picture
of the closest time and date for the set camera
number is displayed in still frame.
• When the multiple recorded data of the same date
and time are existed, execute search by time and
date more than once until the desired picture is
searched.
• Depending on the recording condition, search by time
and date function may not operate correctly.
• When you change the display from single to split or
from split to single during still frame playback, the
recording picture may not be existed at that point or
picture may not be displayed depending on the
selected camera number or timing of displaying the
still frame playback picture.