Mitsubishi Electronics HS-U448 VCR User Manual


 
17
4 Daylight savings will be highlighted. Press the ADJUST
buttons to select ON or OFF. If you are currently following
daylight savings, select ON. Otherwise, select OFF. Press
ENTER.
5 Press the ADJUST buttons until the correct month appears on
screen. Press ENTER.
6 Press the ADJUST buttons to set the current year. Press
ENTER.
7 Press the ADJUST buttons to set the date. Press ENTER.
8 The hour numbers and the am/pm indicator will be blinking.
Press the ADJUST buttons to set the hour and am/pm at the
same time. Pressing ADJUST + moves the clock forward;
pressing ADJUST – moves the clock backward. Press ENTER.
9 Press the ADJUST buttons to set the minutes. When you have
set the correct time, press ENTER. First Time Set-Up menu
will appear, and the clock will start running.
10 Press MENU three times to exit the menus.
You can adjust the daylight saving time manually. When Daylight
savings is highlighted, press the ADJUST buttons to select ON or
OFF.
If you select ON, the VCR will set the clock forward one hour.
If you select OFF, the VCR will set the clock back one hour.
IMPORTANT
At any time that you adjust this setting, check your
programmed recordings to be sure they are set to the
correct times.
≈Set the clock
ƒDaylight savings ON OFF
ƒMonth --
ƒYear --
ƒDate --
ƒTime --:--Ł
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
≈Set the clock
ƒDaylight savings ON OFF
ƒMonth March
ƒYear 2002
ƒDate 18 Monday
ƒTime 7:00pmŁ
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
≈Set the clock
ƒDaylight savings ON OFF
ƒMonth March
ƒYear 2002
ƒDate 18 Monday
ƒTime 12:00pmŁ
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
≈Set the clock
ƒDaylight savings ON OFF
ƒMonth March
ƒYear 2002
ƒDate 1 Friday
ƒTime 12:00pmŁ
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Setting Up Your VCR