Mitsubishi Electronics HS-U448 VCR User Manual


 
49
Try This...
Check that the programmed recording light lights up in the front panel
display.
Check the clock time.
Make sure you have turned the VCR off before the start time.
Check the tracking control. Adjust manually if necessary.
Check the monitor settings.
Check the quality of the video tape.
Clean the video heads using a dry-type video head cleaning cassette.
Do not use a wet-type cleaning cassette, as it may damage your
VCR. Excessive use of a cleaning cassette could shorten head life.
Follow the cleaning instructions carefully.
Have the VCR video heads cleaned by a qualified service technician.
Check that VCR operational setting is set to VCR-A.
Check to see that the VCR/TV slide switch is set to the correct
position.
Change the batteries.
In order to protect your tapes and the VCR heads, the Fast
Forwarding/Rewinding Speed will be slower than 500x under the
following conditions:
1 Use of tapes shorter in length than T-120 (for example, T-30, T-60,
T-90).
2 Activating fast forwarding or rewinding from the middle of the tape.
Problem
The VCR timer recording does
not operate.
Noise in the picture and
distorted sound.
Poor or no Hi-Fi sound.
Playback is noisy or “snowy.”
VCR remote does not function.
The fast forwarding/rewinding
speed is slow.
Trouble Checks