Filter
Top Products
41
using PerfecTape
®
manually
1 Load a tape that has its erasure prevention tab intact into the
VCR.
2 Find a portion of the tape that is OK to record over; this feature
will record over one second of your tape.
3 Press AUDIO/VIDEO on the remote control. Function menu
appears. Press AUDIO/VIDEO until the PerfecTape function
appears.
4 Press ENTER on the remote to begin the test. To cancel the
test while testing, press STOP on the remote.
When the test is finished, the VCR will display the rating of your
tape for 8 seconds. Turn off the display by pressing STOP on the
remote control.
If you wish to erase the settings, eject the tape. The settings will
be erased if the VCR loses power. After the test is finished, the
PerfecTape function will not appear unless the tape is ejected.
Rental Xpress
Rental Xpress is a feature, when activated, that will automatically
rewind the tape to the beginning, eject and power off the VCR,
after it has reached the blank section of 30 seconds or longer on
any rental tape (or any tape with the erasure prevention tab
removed). To activate this feature:
3 Complete steps 1 and 2 on page 39. Customize choices menu
appears.
4 Press the ADJUST buttons to select Rental Xpress. Press
ENTER to select ON or OFF.
5 Press MENU twice to exit the menus.
IMPORTANT
While the VCR is rewinding to the beginning of the tape,
you cannot use repeat playback, counter zero stop and
index search.
VCR
PerfecTape
Use ENTER to start
√Customize choices
ƒVideo mute ON OFF
ƒAuto power save ON OFF
ƒRF converter ON OFF
ƒAuto PerfecTape ON OFF
ƒRental Xpress ON OFF
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to change
∑ ππADJUST to select
Advanced Features