Mitsubishi Electronics HS-U448 VCR User Manual


 
2
Please read all these instructions carefully regarding your VCR before you begin operating it.
Follow all warnings and instructions marked on the VCR. Thank you.
1 Read Instructions
All the safety and operating in-
structions should be read before
the product is operated.
2 Retain Instructions
The safety and operating instruc-
tions should be retained for fu-
ture reference.
3 Heed Warnings
All warnings on the product and
in the operating instructions
should be adhered to.
4 Follow Instructions
All operating and use instruc-
tions should be followed.
5 Cleaning
Unplug this product from the wall
outlet before cleaning. Do not
use liquid cleaners or aerosol
cleaners. Use a damp cloth for
cleaning.
6 Attachments
Do not use attachments not rec-
ommended by the product
manufacturer as they may cause
hazards.
7 Water and Moisture
Do not use this product near wa-
ter — for example, near a bath
tub, wash bowl, kitchen sink,
laundry tub, in a wet basement,
or near a swimming pool, and the
like.
8 Accessories
Do not place this product on an
unstable cart, stand, tripod,
bracket, or table. The product
may fall, causing serious injury
to a child or adult, and serious
damage to the product. Use only
with a cart, stand, tripod, bracket,
or table recommended by the
manufacturer, or sold with the
product. Any mounting of the
product should follow the
manufacturer’s instructions, and
should use a mounting acces-
sory recommended by the
manufacturer.
9 A product and cart combination
should be moved with care.
Quick stops, excessive force,
and uneven sur-
faces may cause
the product and
cart combination
to overturn.
10 Ventilation
Slots and openings in the cabi-
net are provided for ventilation
and to ensure reliable operation
of the product and to protect it
from overheating, and these
openings must not be blocked or
covered. The openings should
never be blocked by placing the
product on a bed, sofa, rug, or
other similar surface. This prod-
uct should not be placed in a
built-in installation such as a
bookcase or rack unless proper
ventilation is provided or the
manufacturer’s instructions have
been adhered to.
11 Power Sources
This product should be operated
only from the type of power
source indicated on the marking
label. If you are not sure of the
type of power supply to your
home, consult your product
dealer or local power company.
For products intended to oper-
ate from battery power, or other
sources, refer to the operating in-
structions.
12 Grounding or Polarization
This product is equipped with a
polarized alternating-current line
plug (a plug having one blade
wider than the other). This plug
will fit into the power outlet only
one way. This is a safety fea-
ture. If you are unable to insert
the plug fully into the outlet, try
reversing the plug. If the plug
should still fail to fit, contact your
electrician to replace your obso-
lete outlet. Do not defeat the
safety purpose of the polarized
plug.
13 Power-Cord Protection
Power-supply cords should be
routed so that they are not likely
to be walked on or pinched by
items placed upon or against
them, paying particular attention
to cords at plugs, convenience
receptacles, and the point where
they exit from the product.
14 Outdoor Antenna Grounding
If an outside antenna or cable
system is connected to the prod-
uct, be sure the antenna or cable
system is grounded so as to pro-
vide some protection against
voltage surges and built-up static
charges.
Article 810 of the National
Electrical Code, ANSI/NFPA 70,
provides information with regard
to proper grounding of the mast
and supporting structure, ground-
ing of the lead-in wire to an an-
tenna discharge unit, size of
grounding conductors, location of
antenna-discharge unit, connec-
tion to grounding electrodes, and
requirements for the grounding
electrode.
15 Lightning
For added protection for this
product during a lightning storm,
or when it is left unattended and
unused for long periods of time,
unplug it from the wall outlet and
disconnect the antenna or cable
system. This will prevent dam-
age to the product due to light-
ning and power-line surges.
16 Power Lines
An outside antenna system
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING
IMPORTANT SAFEGUARDS