Filter
Top Products
26 3. TV Features
For assistance call 1(877) 675-2224
To display 3D content, your Mitsubishi TV requires:
• Active-shutter 3D glasses compatible with any one
of the following:
- The TV’s internal emitters
- A matching external synchronization emitter
connected to the TV’s back panel
-DLP link
Glasses compatible with the TV’s internal emitters
are:
- XPAND model 3DG-X103 IR glasses made for
Mitsubishi 3D TVs
- XPAND model X103 Universal IR glasses
For more information, visit the 3D TV page at
www.mitsubishi-tv.com.
• A compatible 3D source device connected to the
TV via HDMI or StreamTV internet and outputting a
3D signal in one of these formats:
- Frame Packing 1080p/24-Hz or 720p/60-Hz
- Top-Bottom 1080p/24-Hz or 720p/60-Hz
- Side-by-Side format, 1080p, 24/30/60-Hz;
720p, 60-Hz
- Checkerboard format, 1080p, 60-Hz; (lower resolu-
tions may be supported but will not fill the screen)
Initial Setup
1. If your 3D glasses came with a synchronization emitter,
connect the unit to the 3D GLASSES EMITTER jack.
Place the emitter at the front of the TV where there is a
clear path to the glasses.
Note:
No emitter is required if using the TV’s internal
emitters or DLP Link.
3D
GLASSES
EMITTER
Connecting an
external emitter
2.
Power on the TV and the source device.
3.
Connect the source device to the TV’s HDMI input.
4.
When the New Device Found screen displays,
name the input.
5.
Press
EXIT
to close the New Device Found screen.
3 D Video
Use the Picture > 3D Mode menu to enable 3D video.
Choice of Source Formats
If your device is not HDMI 1.4a
compliant, you must choose the
correct setting from this list.
Off
• Turns off 3D images; displays 3D content
as 2D (you may see two images).
• Restores normal TV adjustment options
when viewing an ordinary 2D signal.
Automatic
• Switches the TV to 3D mode and selects the
correct 3D format when the TV detects a 3D
signal from an HDMI 1.4a-compliant device.
• Automatically switches the TV out of 3D
mode when receiving a normal 2D signal.
Notes on the TV’s Internal Emitters
POWER
Internal IR
Emitters for 3D
Glasses
If using glasses
compatible with the TV’s
internal IR emitters, keep
a clear path from the
glasses to the emitter.
35°
20°
35°
20°
16 ft.
16 ft.
16 ft.
25 ft.
25 ft.
Effective range of the
emitters in the vertical
and horizontal planes