Filter
Top Products
69
or
TIMER
POWER
or
IRIS
TM
TIMER
A/V RESET
S-VIDEO
VIDEO
L-AUDIO-R
POWER
A/V RESET
A/V RESET
CANCEL
or
VIDEO
S-VIDEO
L-AUDIO-R
POWER
or
POWER
Front Control Panel Functions, continued
Many remote control buttons are duplicated on the front control panel. Adjust, Cancel, Enter,
Menu, Power, Volume, Channel and Input operate the same way, using either remote control or
front panel buttons. These buttons are explained in the Remote Control Functions section of this
Owner’s Guide.
Turns the TV on or off. The green timer light (models VS-50805,
WS-55805 and VS-60805) or power light (models WT-46805, WS-
55905,WS-65905 and WS-73905) shines steadily when the power is
on.
Intelligent Room Illumination (light) Sensor. Turn this feature on or
off using the VIDEO button on your remote. When IRIS is on, your
TV will automatically adjust picture contrast and brightness for the
best picture based on your room lighting. When on, do not block
the sensor, to ensure an optimum picture.
The green timer light (models VS-50805, VS-60805 and WS-55805)
or power light (models WT-46805, WS-55905, WS-65905 and WS-
73905) will blink when the television is off, if you set the TV to turn
on at a specific time (see Timer Menu in the Menu section).
Press this button to reset all seven of the A/V memory categories to
the factory default settings (see Audio Video Settings Menu in the
Menu section).
Connect the video output of a camcorder or other video device to
the TV.
Connect the S-video output of a camcorder or other S-video device
to the TV. If you connect a S-video cable to this terminal, you
cannot use the adjacent VIDEO input.
Connect the audio output from a camcorder or other device to
your TV.