Mitsubishi Electronics WS-55511 Projection Television User Manual


 
82
83
Problem Possible Solution
• The TV will not turn on after being plugged in. • If green light on front panel is blinking, please wait for at
least one minute for light to turn off, then try to power on
again.
• TV functions do not respond to the remote control • Use the System Reset button as explained below.
or to front panel control and the TV will not power off.
• When viewing a stopped VCR, white lines are rolling • Turn off video mute for the VCR.
on the screen. • Begin playing the tape.
• Change the VCR input to the antenna input.
• TV turned itself Off and the light on the Front Panel started • Momentary power uctuation caused the TV to turn Off to
ashing prevent damage. Wait for the green light to stop ashing and
turn On again.
If the TV does not stay turned On, use the System Reset
button. If this happens frequently, obtain an AC line in power
conditioner / surge protector.
Using The System Reset Button: If the TV doesn’t respond to either the remote control or the front panel controls
will not power off, press the SYSTEM RESET button on the front panel with a pointed item like the point of a ball
point pen or end tip of a paperclip.
The TV will turn off and the TIMER light will ash quickly for about one minute. When the TIMER light stops ashing,
you may turn on the TV again. The changes you made while the TV was on before you used the SYSTEM RESET
button may be cancelled, however, the changes you made previously are not cancelled. Only those changes since
the last power on may be lost when the system reset button is pressed. All other settings are retained.
Appendix G: Troubleshooting