Mitsubishi Electronics VS-60609 Projection Television User Manual


 
Page 20
MODELS: VS-45609 / VS-50609 / VS-55609 / VS-60609 / VS-60719 / VS-70709
5. Circuit Adjustment Mode
Except for the following, all adjustment items must be performed
using the remote hand unit.
Lens Focus
Electrostatic Focus
A. Activating the Circuit Adjustment Mode
1. Press the "MENU" button on a remote hand unit.
2. Press the number buttons "0", "1", "5", "7" in sequence.
The screen will change to the Adjustment Mode.
Note: Repeat steps 1 and 2 if the circuit
adjustment mode does not appear
on screen
B. Selection of adjustment Functions and
Adjustment Items
To select an adjustment item in the circuit adjustment mode,
first select the adjustment function that includes the specific
adjustment item to be selected. Then, select the adjustment
item.
Refer to the following pages for the listing of adjustment
functions and adjustment items.
1. Press the "AUDIO" button on a remote hand unit to
select an adjustment function. Each time the button
is pressed, the Function changes in the following
sequence:
2. Press the VIDEO button to select a specific
Adjustment Item. The Item number increases each
time the VIDEO button is pressed.
C. Changing Data
After selecting an adjustment Item, use the ADJUST
UP/DOWN button to change data.
Press ADJUST DOWN to decrease the data value.
Press ADJUST UP to increase the data value.
1
2
3
5
6
789
0
SQV
QV
4
POWER
HOME
PAUSE
REC
FF/FWDREW/REV
PLAY
STOP
VOLUME
INFO
CANCEL
MENU
PIP/POP
PIP SIZE
PIP CH
INPUT
SLEEP
VIDEO
AUDIO
MUTE
CHANNEL
ENTER
PIP INPUT
EXCH
GUIDE
TV
AUDIO
CABLE/DBS
DVD
VCR
ENTER
VIDEO
AUDIO
ADJUST
UP/DN
MENU
VCJ AUDIO YUV
PIP HR
Adjustment Functions