Filter
Top Products
62
63
Setting the Clock
You may choose to set the clock that your TV will use
manually or automatically.
Manual
Figure 18
To manually set the clock, you need to select the
current time, including AM or PM, current date, time
zone for your area and the Daylight Savings time
setting.
Set Time
Press ADJUST or repeatedly to slowly select
the hour or press and hold to quickly select the hour.
Press ENTER to move to the minutes options. Press
ADJUST or to select minutes, then press ENTER
to select AM or PM.
Set Date
Press ADJUST or to select the correct date.
Press ENTER after each selection.
Time Zone
Select your correct time zone. Press ADJUST or to
select the time zone (Atlantic, Eastern, Central, Mountain,
Pacific, Alaska or Hawaii) for your area. Then press
ADJUST to move to the Daylight Savings time option.
Daylight Savings
Select the Daylight Savings time (DST) option that your
state uses. Press ADJUST or to select Applies if
your state or area uses DST, or Ignore if DST does not
apply.
Auto
Select the Time Zone and Daylight Savings time setting,
as noted above. You may then tune to a channel
(on Ant-1 or Ant-2) that uses Extended Data Service
Time Menu
Figure 18. Time Menu, Manual Clock Setting
Timer On/Off
Figure 19
The timer can be turned to On or Off. When On, you
need to select the time and day to turn On and the
device and channel to display. At your preselected
time, the timer will turn the TV On, and this message
will be displayed: “Press a button for the TV to stay
on”. Press any button on the remote control within 5
minutes or the TV will turn itself Off.
Set Time
Press ADJUST or repeatedly to slowly select
the hour or press and hold to quickly select the hour.
Press ENTER to move to the minutes options. Press
ADJUST or to select minutes, then press ENTER
to select AM or PM.
Set Day
Select the day or days that the TV will turn on
automatically. Press ADJUST or to select
Everyday, Mon-Fri (Monday through Friday), or the
individual days of the week.
Device
Press ADJUST or to select the device to use when
the timer turns on the TV. If the TV is already on, the
timer will turn the TV to this selected device.
Channel
When Antenna is the selected device, you may select
any memorized channel. Press ADJUST or to
select the channel and the TV will tune to this channel
in memory when the timer turns it on. This includes
sub-channels for digital choices.
Figure 19. Time Menu (Timer On/Off)
(XDS) time data, typically a PBS channel. The Auto
selection will automatically retrieve the correct time
and date information from this channel. Be aware that
if a channel displays incorrect time information, it is
because of information sent from the broadcaster and
is not a defect of the TV.