Filter
Top Products
Troubleshooting (cont.)
Problem Possible Solution For More Information
The remote control doesn't
WOrk.
Check that the batteries are
installed correctly.
Check that the select switch
is set to "TV".
Be sure that you are
pointing the tip of the
remote control toward the
TV from a distance of no
more than 20 feet.
See Gettmg Ready to Use
the Remote Control in. "_
Chapter Ifor an explanation
of how to install batteries in
the remo:e control.
See Remote Control Buttons
and Functions in Chapter 1,
which explains where the
select switch is located.
See Getting Ready to Use
the Remote Control in
Chapter 1, which contains
pointers tbr using the remote
control
The TV takes several
seconds to respond to button
commands.
• Use the ENTER button to
avoid delays.
See Char_ging Channels in
Chapter 3, which explains
the function of the ENTER
button.
You can't access a channel.
• Be sure that the channel you
want to view is programmed
into memory.
• Check that the TV is tuned
to the correct input source
(antenna) for that channel.
See Mem.grizing Channels in
Chapter 3, which explains
how to program channels
into the TV's memory.
See Selecting the Input
Source in Chapter 3, w,hich
explains how to chan_e _he
input sou:rce.
On-screen displays appear
each time you adjust a
function.
• This is part of the normal
operation of the TV.
See Screen Displays in.
Chapte:r 4, for a full explana-
tion of the on-screen dis-
plays.
100 Chapter 5: Troubleshooting