Mitsubishi Electronics WD-52725 Projection Television User Manual


 
12
13
  

 
Input 3
This input can be used for
convenient connection of a
camcorder or other video
device to the TV. Please
note that if you connect
to the S-VIDEO terminal,
the VIDEO terminal is
deactivated. The VIDEO
terminal is active when there
is no S-Video connection.
Front Panel Inputs and Media Card Slots
INPUT 3
Media Card Slots and IEEE 1394
Input/Output
There are four card slots in the front of the TV that
allow the display of JPEG pictures from many digital
cameras, MP3 or WMA audio files recorded from
computers or other digital recording devices. The
card slots are designed for specific types of cards
and other cards or objects should not be inserted
into the slots as this may damage the TV. CARD-
1 slot is compatible with both MultiMediaCard™
(MMC) and Secure Digital (SD) cards. CARD-2 slot
is compatible with SmartMedia™ cards. CARD-3
slot is compatible with CompactFlash® cards and
CARD-4 is compatible with MEMORY STICK™ cards.
See media card (slideshow, playlist) Setup for details
about JPEG, MP3 and WMA file types that are
compatible with the TV.
The IEEE 1394 input/output allows for temporary
connection of IEEE 1394 devices such as some
camcorders, to the front of the TV. This connection
works the same way as rear IEEE 1394 connections,
please refer to the NetCommand® information
(Chapter 3) for details.
Portions of the advanced circuitry of this TV
must continue to operate even when the TV is
turned off. Some of these circuits therefore
need to be cooled at all times. A low
power standby fan may be heard in a quiet
environment. This is normal operation.
IMPORTANT