Mitsubishi Electronics ws-65712 Projection Television User Manual


 
34
35
Edit NetCommand™, cont’d.
Monitor Out to AVR Screen
Figure 2
This screen is shown only if an A/V Receiver is the
device being added or edited. The Monitor Out to
AVR screen allows you to select the input on the
A/V Receiver that is connected to the Monitor
Output of the TV. This connection allows recording
of signals from the TV monitor output through the
A/V Receiver to an analog VCR.
Figure 1. Connection screen - Cable (example)
Connection for Device Screen
Figure 1
The Connection screen allows you to select the
inputs used with the devices that are connected to
the TV Inputs 1-5, Components 1&2 and Input-DTV.
It also allows you to select which input the device
is connected on the A/V Receiver. Add or remove
check marks to indicate what type of connections
(Audio, Video or Both) are used with each input.
Note: Video inputs to the A/V Receiver are
normally used to transfer signals to the line input of
a VCR for recording.
Figure 2. Monitor Out to AVR screen.
Monitor Out to VCR Screen
Figure 3
This screen is shown only if an A/V Receiver is not
connected. This connection allows recording of
signals from the TV via monitor output to an analog
VCR. The Monitor Out to VCR screen conrms the
connection.
Figure 3. Monitor Out to VCR screen.