Filter
Top Products
6
C) Set the Outlet Pair to “Switched On After Delay”: Press “MENU” until the display shows the status
of the AUDIO outlet pair. Press the “SET” button until the DELAY TIME changes to the desired DELAY TIME
in second(s) before this outlet pair will turn on. After the “ON/OFF” button is pressed, the display will
resemble Figure 4.
When the PowerSource is switched on by pressing the front panel ON button, or by external trigger signal,
the outlet pair will be “live” after a delay set by the DELAY TIME—20 seconds in this case. The outlet pair
which has a maximum time DELAY TIME setting will be turned off immediately once the PowerSource is
switched off by pressing the front panel ON/OFF button or by external signal.
D) Set the Outlet Pair to “Unswitched" (Always On): Press the “MENU” button until the display shows
the status of the AUDIO outlet pair. Press the “SET” button until the display resembles Figure 5.
Once the “Unswitched” is set (whether you turn your PowerSource on or off) any component plugged into
those outlets can receive power continuously, as long as your PowerSource is plugged into a 120 volt wall
socket.
Note: The unit is shipped with all outlet pairs set to “Switched On”.