Filter
Top Products
4
4- To run the “MANDATORY” Test Dish function, hit the power button, wait 10
seconds for the Nomad to finish the startup sequence then, press the ‘Find’ and ‘Stow’
buttons simultaneously. This procedure must be performed following a configuration
change.
The purpose of the “MANDATORY” test dish:
A- Automatically determines if the non-skewable mount is a Dome or
Open Face dish.
B- Checks to ensure proper working order of all (Elevation, Azimuth,
Skew) motor functions.
NOMAD 2 UNIVERSAL CONTROLLER “FRONT” PANEL
BUTTONS:
FIND: (Find Satellite)
Pressing the Find button will begin the dish “search” to locate and lock
onto the “main” satellite.
For non-skewable single LNB dishes pressing the Find button, while on
satellite enables you to switch between multiple satellites. For example:
Pressing the find button while locked onto:
• Dish Network will toggle between satellites 110 and 119.
• Dish Network International East will toggle between satellites
61.5, 110, and 119.
• Dish Network International West will toggle between satellites
110, 119 and 148
• Bell ExpressVu will toggle between satellites 82 and 91.
Dish Services and their Assigned Satellites
1. Dish Network – Can use satellite(s) 110 & 119 [also 61.5 and 148]
2. DirecTV – Can use satellite(s) 101
3. Bell ExpressVu – Can use satellite(s) 82 & 91