Filter
Top Products
13
GB
Connections
NOTES
• Refer to the owner’s manual of your stereo system for operating instructions.
• Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before
making any connections.
• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the DVD player away from
the tuner and radio.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume sound.
•Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be
damaged.
WARNING
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this DVD player to an
AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to “Selecting
Digital Audio Output” on page 21).
CONNECTING TO A STEREO SYSTEM
To VIDEO OUT
To AUDIO OUT (L/R)
To video input
S-video cable (Not supplied)
To S-VIDEO OUT
To audio inputs
Audio cable (supplied)
To S-video input
Video cable (supplied)
Stereo system
TV or monitor with
audio/video inputs
If the TV has an S-video input,
connect the DVD player with the
S-video cable
T571 manual (GB) 19/11/01 2:14 pm Page 13