Filter
Top Products
6-7 Installing Optional Internal Devices
Restoring NVRAM Information
a. Set the NEC EXPRESSBUILDER CD-ROM in the CD-ROM drive, and activate the
NEC EXPRESSBUILDER.
b. When the NEC EXPRESSBUILDER becomes active, activate the Offline Maintenance
utility by selecting "Tool" from the menu → "Offline Maintenance Utility" → " Manage
System Information."
c. When the Offline Maintenance utility becomes active, select "Menu for Maintenance
Persons" from the menu.
(Screen image)
Offline Maintenance Utility
Edit/Display HW Logs
Edit/Display SW Logs
Edit/Display HW Event Logs
Display BIOS Setup Information
Display System Information
Manage System Information
Set Remote Maintenance Information
Help
Exit
Manage System Information
Save
Menu for Maintenance Persons
Exit
d. Do not care about a notice displayed, and press the Enter key. The system asks you to
enter the password. Enter the password as shown below.
Password >CENVRAM
e. Select restoration of the old board information when the following screen appears after
you enter the password:
Menu for Maintenance Persons
Restore (at replacement of the mother board)
Update Product/Cabinet Information
Return to the Previous Menu