Filter
Top Products
6-8 Installing Optional Internal Devices
f. When the "Restore (at replacement of the mother board)" screen appears, insert the
floppy disk containing the backup copies of the NVRAM information into the floppy disk
drive, and press the Enter key.
(The following is an image screen, which may be different from the actual one.)
Restore (at replacement of the mother board)
Data Name Device Address Size File Name Setup
BIOS Information 1 -------- -------- -------- -------- O
BIOS Information 2 -------- -------- -------- -------- O
Maintenance Utility Information -------- -------- -------- -------- O
BMC Information 1 -------- -------- -------- -------- O
BMC Information 2 -------- -------- -------- -------- O
BMC Information 3 -------- -------- -------- -------- O
ROM Pilot Information 1 -------- -------- -------- -------- O
ROM Pilot Information 2 -------- -------- -------- -------- O
Product Information -------- -------- -------- -------- O
Cabinet Information -------- -------- -------- -------- O
Internal useara -------- -------- -------- -------- O
Start restoration (Data with a circle shown in the column "Setup" is restored.)
Exit: [ESC]
g. Press the Enter key when the following confirmation screen appears.
After that, the NVRAM information is loaded from the floppy disk.
Restore (at replacement of the mother board)
The restore processing is in progress.
Wait until the processing is completed.
Execute: [Enter] Cancel: [ESC]
h. The screen displays restoration results as shown below.
(The following is an image screen, which may be different from the actual one.)
Restore (at replacement of the mother board): Execution results = normal
Data Name Device Address Size File Name
Setup Result
BIOS Information 1 -------- -------- -------- -------- O O
BIOS Information 2 -------- -------- -------- -------- O O
Maintenance Utility Information -------- -------- -------- -------- O O
BMC Information 1 -------- -------- -------- -------- O O
BMC Information 2 -------- -------- -------- -------- O O
BMC Information 3 -------- -------- -------- -------- O O
ROM Pilot Information 1 -------- -------- -------- -------- O O
ROM Pilot Information 2 -------- -------- -------- -------- O O
Product Information -------- -------- -------- -------- O O
Cabinet Information -------- -------- -------- -------- O O
Internal useara -------- -------- -------- -------- O O
Exit: [ESC]
i. Terminate the Offline Maintenance utility when the NVRAM information has been
loaded from the floppy disk.