Filter
Top Products
English-10
English-11
Source Connection Guide
1. HDMI – Connect the primary source for digital video such as a DVD
multimedia player or set top box through this all digital connector. The
white color band on the rear of the display indicates this connection.
2. PC IN – Connect the video and audio cables from a computer here.
3. AV IN (AV/S-VIDEO) – Connect the primary source for composite
video devices, such as a VCR or video game. Use the white and red
connectors to connect the external audio from the same source. The
signal being carried by the S-Video cable and connector, if connected,
will take priority over the Video RCA connector (yellow connector).
4. COMPONENT (Y/Pb/Pr with Audio L/R) – Connect the primary source
for component video devices such as a DVD Player or set top box here.
From left to right, use red for Pr, blue for Pb, green for Y, red for right
audio (R) and white for left audio (L) inputs.
5. ANTENNA/CABLE DIGITAL/ANALOG – Connect to an antenna or
digital cable (out of-the-wall, not from Cable Box) for the digital tuner.
6. SPDIF (Optical Digital Audio Out) – When a digital audio signal is
associated with the input selected for viewing, the digital audio will be
available on this SPDIF connection to your home theater system.
7. AUDIO OUT – Connect an external sound system with standard audio
cable to the AUDIO OUT L and R jacks on the back of your display and
to the AUDIO IN jacks on the amplier.
PC IN
3 4 SERVICE
PORT
AC POWER
NI CP
Once your equipment is connected, use the following procedure to view the input signal:
Press the source button on the remote controller to select the relevant source to view.
(ex: Press COMP button to select “Component” if you have connected a source to the
Component input.)